Multi-parameter water quality detector-三川智控™

Welcome to Suntrans! [Login] [Register] Views：0

RunSystem

Recruitment

Home

Products

Industries

Services

About Us

简体中文

首页

产品

ST-MWQ-5 Multi-parameter water quality detector

ST-MWQ-5

Multi-parameter water quality detector

Industrial grade lightning protection DC 12V power supply, ultra-low power consumption design Can be powered by solar energy and battery

consulting price

The price is subject to the contract

Product Manual

View more manuals

ST-MWQ-5 Multi-parameter water quality detector instruction

Download

Consult now

Application scenarios

Water quality monitoring station

Industrial water quality testing

Aquaculture farm testing

Advantages

Automatic timing measurement

Through remote time calibration, the synchronization of clock information is guaranteed to avoid the problem of data inreal-time

Large-capacity data storage

To realize the data storage in situ, to ensure that the collected data is not lost

Data interface

Wired communication can be connected to 485 bus, wireless communication can be connected to radio frequency wireless communication equipment and GPRS/CDMA wireless communication equipment

Ultra-low power consumption

According to the principle of who works who powers on, ensure that the sensor is always in the most economical state of power consumption

Fully sealed die structure

The diameter of the sensor is only 110mm, input and output only need a four-core cable, installation, connection is very simple

Environmental parameters

Operating Environment Requirements
Ambient temperature	0℃～+60℃
Ambient humidity	0-100%
Ambient atmospheric pressure	80KPa～106KPa Where there is no strong electromagnetic interference Places without significant shaking and severe shock and vibration
The worst storage and transportation conditions	-40℃～+60℃

Technical parameter

Product Model	ST-MWQ-5
Working voltage	9－20VDC
Quiescent operating current	2mA
Peak operating current	100 mA
Maximum collection frequency	once a minute to once every 24 hours
Remote Program	Setting
Maximum acquisition time	10seconds
Mean time between failures	one year
Signal output	RS485

Detection Indicator

Test items	Range	Precision	Resolution
PH value	0.00～14.00 pH	±0.1pH	0.01 pH
Conductivity	0～200mS/cm	±0.5% F.S	0.001uS/cm
Dissolved oxygen	0 ~ 20.0 mg/	0.1μg/L	±0.5%FS
Water level	0－20m	±0.15％FS	3mm
Water temperature	0～50.0℃	0.1℃	0.0625℃

Relevant certificates